- There are totally 6 inputs, including 4 microphones, 1 AUX, and 1 CD/Tuner/Tape (selectable) inputs
- For convenient to operate, CD/Tuner/Tape input selection switch and its level control are on the front panel. One additional MIC 1 input is also on the front. All other input and output level, volume, and tone controls are on the front. MIC1 has first level VOX priority over other input.
- One the rear there are two speaker screw terminals. Each one has low impedance 4 ohm and 8 ohms, and high-level 70V and 100V. Choose only one of these output connections to match the speaker. Furthermore, each channel has record output.
- To ensure the amplifier safety, it has speaker short, over temperature, and overload protection. Besides AC power source, series has DC 24V input power screw connector as backup power source.
- Power output 100Wx2 ( RMS )
- DIGITAL RADIO FM
- ECHO WITH DELAY AND REPEAT
- 5 CHANNEL INPUT MICROPHONES, PHONO, AUX
- AUX OUT – TAPE OUT
- 100V, 70V, 8 OHM OUTPUT
- BASS AND TREBLE CONTROL
- OVER TEMPERATURE, OVERLOAD, AND SPEAKER SHORT PROTECTION
- AC 115/ 230V 50/60Hz DC 24V
- MADE IN TAIWAN
- Type: Echo Dual Mixing Amplifier
- Supply Mains Voltage: AC 115/230V, 50/60 Hz ± 10
- Supply Battery Voltage: DC 24V (MAX 10% deviation)
- Output power (RMS):»CH1: 100W +»CH2: 100W
- T.H.D: ≤ 1% at 1KHz, rated power
- Input Sensitivity:
»1/4″ Phone Jack (Unbalanced)»Aux [email protected]»RCA Jack (Unbalanced)»CD, TUNER, TAPE [email protected] ohm
»Record Out 1V
- Frequency Response: 50Hz ~ 15KHz ± 3dB
- Output: 100V, 70V, 8 ohms, 4 ohm
- Tone control:BASS 100Hz ± 10dBTREBLE 10KHz ± 10dB
- S/N Ratio:86 dB
- AC Power consumption: 640W
- DC Power consumption: 15A
- Weight: 15 Kg
- Dimension: 132(H) x 425(W) x 355(D) mm
- Mounting options: Table top or 19” rack.